[NEW]CAMPING MOON One-Touch Piezoelectric Ignition Power Torch Pre-Heat/K

Description

Description
Fire diameter: diameter 22mm
Weight: 150g
Size: 150x65x45mm
Material: Stainless steel, zinc alloy, copper
Ignition system: One-touch piezoelectric ignition
Maximum output: 1,400kcal / h
Temperature adjustment range: It can be adjusted depending on the application from 1300 �Ž powerful centralized flame until soft flame of 900 �Ž (there is a temperature difference by the fuel).
Compliant: (It is also possible to use connects with the OD can by using the adapter of another sales of OD cap) CB cans.
While a mini size, a power torch put out the output of 1,400kcal / h, is adjustable knob the flame of up to 900-1,300degC.
It comprises a generator inside the torch head, just become combustion efficiency up by vaporizing only 10 seconds.
By adjusting the air control knob, adjustable from the central flame (flame temperature 1300 degrees) in soft flame (flame temperature 900 �‹). Depending on the work applications, you can change the type of the flame.
Of course, the ignition operation of firewood and charcoal, site work, cooking, hobby, from outdoor leisure hobby, such as do-it-yourself, takes an active part in a variety of applications.
Various Tsukaimichi
Life applications:
Cake of surface eruption / broiling, barbecue, chimney starter, sushi processing, camping, making outdoor cooking, ignition, processing of the head of the pig foot / pig.
However, when the results in use on low heat at the ignition start, because there is a tendency for thermal power is not stable,
To fully open the firepower it seems whether it is better that the low heat from standing for a while.
Industrial applications:
Bending iron pipe / steel / plastic pipes, metal surface clean and the cement / terrazzo surface treatment, welding, cutting, crafts machining, pipe decompression, rapid heating before starting the engine in winter, dry / heat.
How to Use Easy
Mounting of the cylinder
1. When mounting the burner, please operation must be performed in the state that made a cassette bomb.
2. Close the gas ejection ports by turning the gas amount adjusting knob of the torch burner until it stops in the right direction.
3. Please securely connected by turning the cylinder connection lock cylinder valve opening. It is dangerous because it will If it is not properly attached to the cause of the gas leak. Please firmly seated.
4. Make sure that there are no gas leaks in the connections.
Confirmation before ignition
1. Make sure there is nothing flammable and flammable around.
2. Gas amount of the adjustment knob of the torch burner "-" Please make sure that the closed full to the direction.
Cassette bomb Do not or tilt in the transverse or shake strongly while wearing. Not vaporized gas will cause an ignition failure or abnormal combustion is blown.
ignition
1. Gas amount of the adjustment knob of the cylinder should be fully open by turning "+" to the direction.
2. Please toward the crater to no safe direction of the people and flammable materials.
3. The amount of gas adjustment knob turned to the "+" direction, should be ignited by a piezoelectric igniter When you hear the gushing sound of the gas. Do not remove your hand or fingers in absolute from the flame to the crater of earlier when this will blow out.
Four. Or tilt significantly immediately after ignition, please be careful that you do not or rocking.
Upon ignition, it may flame fly. The case knob "-" in the small amount of the amount of gas by turning in the direction, will be in the normal state and wait for about 10 seconds until the torch burner warms up.
How to use after ignition
1. Please use gas cylinder is always upright fixed to.
Until after ignition torch burner warms up (approximately 10 seconds) Do not fully open the knob.
2. Adjustment of the flame can be in the amount of gas adjusting knob. Strongly Turning to the "+", "-" Turning to the weaker.
Fire fighting
1. The knob of the bomb "-" - turn up to it stops turning until it stops to, make sure that disappeared in the fire the knob of the torch burner "".
Crater and crater conduit until well after the fire fighting is there is a risk of burns and touched with bare hands because of the high temperature. Also please from standing for more than 10 minutes after the fire because there is a danger of fire is also the case for housing for storage.
Precautions
Q Problem Solving?
A This is not a malfunction when such
1. Difficult to ignite the gas ejection sound is.
It is because the gas injection amount is too small at the time of ignition.
2. Flame increases.
This is because of the ejection of the unvaporized gas. Use the cylinder upward upright. In addition, the amount of gas adjustment knob Wakazu "-" Please turn to direction.
3. Flame has become smaller.
Also it reduces the long-term continuous use to when the flame will lower the pressure becomes less amount of gas cylinder.
Payment
We accept PayPal only.
We usually ship within 5 business days of receiving cleared payment.
Our return policy, In the only case of unopened item package.
We ships from Japan this product. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer�fs responsibility.
Shipping
Shipping by DHL; expedited shippment takes about 1-4 business days
+ handling time about 5 business days.
International Shipping;
Some countries are applied to EMS.
Almost all countries are applied to Expedited Shipping /DHL
International Buyers - Please Note:
* Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
* Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
* These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
* We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.
* Customs procedures take time and delivery may be delayed.