Solid Walnut European Skull Mount Wall Mount for Mule Deer, Whitetale, Antelop

Description

Solid Walnut -
Other wood/color available, look at my other items for sale
Completely assembled minus the Trophy
Simple instruction listed below, it will take longer to find a screw driver, drill and drill bit then it will take to mount.
Each plaque comes with a keyhole bracket on the back for hanging.
These mounts are 100% Hand Crafted in the USA and made from 100% solid wood grown in the USA.
Slight variations in color and grain patterns can be expected between plaques due to the nature of solid wood.
Please take note the pictures are of the same plaques and depending on the background, varies what the color looks like.
Finish coats are polyurethane
Plaques measure approx. 6" x 14"
I stared to make these plaques because there was nothing in the market that I had in mind for my own trophy’s.  I also have been a wood worker for years.  I built several for myself and people starting questioning and wanting them immediately.  Two years later I actually got all my trophies mounted, I just couldn’t keep any around long enough for me to mount them.
Trophy is not included Instruction to mount are really simple and are as follows.
1.  Place your trophy on the mount that you planning on mounting.  Take note to the pre-drilled hole in the mount and decide where you want to position your trophy.
2. Drill a 1/8” hole corresponding to the predrilled hole on the bottom side of your trophy.
3. Screw the 2.5” screw supplied from the back of the mount through the front and into the hole you drilled in your trophy.
4. Make sure the head of the screw is past the edge of the wood.
If you have any special request, or questions please email me and I will do my best to accommodate you.
Thank You