Mig Gun Torch 10 ft for Solar Welders P/N 4320

Description

A HTP replacement welding gun for a Solar welder.  This gun carries Solar's part number 4320.  This is a direct replacement welding gun with no modifications required.  It uses the same tips, gas nozzles, and diffusers as the original gun.  Take a close look at the end of the welding gun and notice how the gun connects to the welder and also how the trigger wires connect to the machine - if your machine looks like this, then this gun will fit.
This 10 ft long gun will handle .023”, .024”, .025”, .030” and .035” diameter welding wires.   It will feed all types of wire, steel wire using gas, flux cored wire requiring no gas, and stainless steel wire.   It comes standard with a .030” diameter tip in the welding gun.
Not only will this gun let you keep more of your hard earned money in your pocket,
but we believe this HTP replacement gun is better than the OEM gun
as it is a heavier duty gun.  Picture 1 gives you a good overview of the gun.  You can see the heavy duty spring in both the handle and where the gun plugs into the machine, which offers a much better support system than the OEM gun.
Picture 2 shows a close up of the handle.  Our handle has a good clean ergonomic design, so it fits in your hand better than the solar gun.  The spring support prevents the cable from kinking where it leaves the gun.
Picture 3 gives you a close up of the end of the welding gun where it plugs into the welder.  Again we use a spring support to prevent the cable from kinking.   Picture 4 is a close up of the rectangular trigger connector.
Picture 5 (photo 1) shows you the high quality of this gun. The crimp is insulated to protect the trigger wires from chafing. Picture 6 (photo 2) shows the actual crimp with the insulation removed. You can see the crimp to retain the rubber outer jacket and the copper crimp which secures the copper wires to the brass fitting to carry the welding current. Picture 7 (photo 3) shows a cutaway of the coaxial cable assembly, where you can see the copper wires that carry the welding current, the trigger wires, the inner tube that the wires are wrapped around, and which also has the liner running up the center of it. Between the liner and the inner tube is where the shield gas runs. We use the same high quality construction on this welding gun we use on all of the welding guns which are OEM on the HTP Mig welders.
The welding gun is complete - no tricks here - it includes the liner, gas nozzle .030 tip and has rectangular trigger connections. We have this gun available in a flex also.
This gun fits the following Solar Models:
117-010  2-125
117-011  2-175
117-020  2120
117-026  2115
117-033  2110
117-039  2175
117-043  2120
117-050  2130
117-051  2150
117-053  2140
117-067  2160
***Save on shipping
by combining purchases of select MIG, TIG, or Plasma parts. However,
you must pay for all items with one combined payment for this shipping discount.
Separate payments for each item are not eligible for a shipping discount
.
Go to our store and see all the items we have for sale:
https://stores.ebay.com/welders4less
If you need any other hard to find welder parts that are not listed, send us an e-mail with a digital photo- we might have just what you need.
Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where for over 35 years all we have sold are quality welding supplies at affordable prices. Please send us a message if you have any questions on our items.
S4320T-10-15H