-40%
HOBART 500553 MIG Welder,Handheld,115/230VAC
$ 580.79
- Description
- Size Guide
Description
Handler® 210MVP MIG Welder - 500553A versatile wire feed welder capable of operating on either 115V or 230V input power. Welds up to 3/8 in. mild steel, spool gun ready for aluminum and is flux-cored or MIG ready.
7 (230 V) and 4 (115V) voltage settings, with infinite wire feed speed control
Allows you to fine control the output parameters for improved arc performance with less spatter for a better bead appearance and less clean up.
Dual-voltage capability with MVP (multi-voltage plug)
Allows you to connect to common 115 or 230 V power receptacles without the use of any tools – simply choose the plug that fits the receptacle.
Door Chart with initial settings
You are able to quickly reference initial settings for different wires, gases, materials, and thicknesses. Provides you a quick starting point whether you are a novice or professional.
Quick Select drive roll
Less of your time consumed in setup by offering three grooves – two for different size solid wire and a third for flux-cored wire.
Self-resetting thermal overload
Protects power transformer from thermal overload to provide you maximum reliability.
Max 210 amps in small portable case
Sized for you to easily transport the unit to the jobsite with the power to weld 3/8 in. mild steel.
Accepts uncomplicated, simple-to-install direct plug-in SpoolRunner 100 spool gun
Allows you to weld aluminum with enhanced feed ability and reduction of “bird-nesting.
Integrated spool gun control circuitry is standard
Eliminates your need for an additional control box or adaptor to connect the SpoolRunner 100 spool gun.
Built-in contactor
Keeps wire electrically “cold” until trigger is pulled which gives you ease of use and keeps you safe.
Industrial cast aluminum wire drive system
Durable wire feed provides you professional performance
Convenient polarity changeover with tip holder
Easier and quicker for you to change polarity between solid or tubular wire.
Short circuit protection
Protects unit against current overload.
Current-limited motor protection
Protects wire feed system from overload, you won’t need to change or reset the circuit breaker button.
PROCESSES
Flux Cored (FCAW)
MIG (GMAW)
Title
Handler® 210MVP MIG Welder
Material Thickness
Mild Steel 1/4 in – 3/8 in.
Weldable Metals
Stainless Steel
Steel
Aluminum
Input Voltage
110/115/120 V
220/230/240 V
Input Phase
1-Phase
Input Hz
60 Hz
Current Type
DC
Rated Output
115 V, 90A @ 20%
230V, 150A @ 30%
Max Open Circuit Voltage
34 VDC
Wire Feed Speed
40 IPM 770 IPM
Weld Output
CV
Net Width
10.625 in
Net Height
12.375 in
Net Length
19.5 in
Net Weight
79 lbs
Warranty
3 Years