Aimpoint PRO Red Dot Reflex Sight with QRP2 Mount and Spacer 2 MOA 12841

Description

Aimpoint PRO
The Aimpoint Patrol Rifle Optic (PRO) was designed to meet the demanding real-world requirements for use on duty rifles. The PRO comes in a complete, ready to mount kit including the action-tested Aimpoint QPR2 rail grabber mount, and a removable spacer for adjusting the optical height of the sight for use on carbines and shotguns. Place this optic on any Picatinny rail and snap the QRP2 tightening knob three times for a perfect, return to zero mount every time - one that will not damage or deform your rail. The 2 MOA red dot allows for enhanced speed on target and increased first shot hit probability. Transparent rear, and solid black front protective flip-up lens caps allow the sight to be used with the covers closed in an emergency (with both eyes open) and make it possible to engage targets directly into bright sunlight by leaving the front cover closed.
30,000-hours (3 years) of constant-on battery life at setting 7 of 10.
Uses one DL 1/3N battery (supplied).
Absolute co-witness with carbine height iron sights (with the supplied spacer installed).
2 MOA red dot for accurate target engagement at all distances
In-service date and battery change date reminder decal included
Submersible to 150 Feet
4 night vision compatible settings, and 6 daylight settings (including one extra bright for use in bright sunlight)
Compatible with all generations of night vision devices
Operationally parallax free
Threaded front lens opening allows for use with optional screw-in anti-reflection device (ARD)
Specifications
Operating Principle
Reflex Collimator sight with LED
Optical Magnification
1x
Aiming Dot Size
2 MOA
Optical Signature
No optical signature at 10 meter
Peak Wavelength
650 ± 10 nm
NVD Compatible
Yes
Optical Coating
Anti-Reflex
Clear Aperture
26 mm
Eye Relief
Unlimited
Battery Type
3V lithium type 2L76 DL1/3N.
Battery Life Day Time Use
30,000h Continuous (pos. 7 of 10)
Power Intensity
4 NVD 6 Daylight
Length
115 mm (4 1/2″)
Length Conf
130 mm (5 1/8″)
Width
55 mm (2 3/16″)
Height
55 mm (2 3/16″)
Height Conf
67 mm  (2 5/8″)
Weight Sight Only
(incl battery)
7,8oz
Weight Conf
11.6 oz Lens Covers Mount Spacer
Housing Material
High Strength Aluminum
Housing Finish and Color
Matte Black
Surface Treatment
Hard Anodized
Adjustment
1 click 16 mm at 100 meters
9/16″ at 80 yds
Temperature Range Operation
-45°C to 71°C (-49°F to 160°F)
Temperature Range Storage
-51°C to 71°C (-60°F to 160°F)
Submersible
45 m (150 ft.)