ADE RD3-009 Red Dot Sight +OPTIC PLATE for ALL GLOCK and TAURUS GX4/G3C pistol

Description

This listing comes with a picatinny plate(pre-assembled), and a pistol plate for Glock. This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights, because the rear sight dovetail between GX4, G3C & G3 with factory steel sights and glock are exact the same. Taurus made the dovetail dimension of above mentioned models based on the same specification of Glock rear sight, but made everything model else, in a different dimension. Such as G2, G2C, TX22, PT111, G3. Therefore if you have a Tuarus model other than Taurus GX4, G3C & G3 with factory steel sights, you will need a different mounting plate.
This glock mounting plate is for STANDARD glock models, it does not fits MOS (optics ready) glock or glocks with aftermarket slides. This glock mounting plate basically replaces the rear iron sight of the handgun. The rear sight dovetail is exactly the same for all glock model, therefore this plate fits all glocks from glock 17 to glock 43 to glock “100”.
If you have an aftermarket Glock slide, please ask the slide manufacturer what exact optic cut they put on their glock slide and let us know for us to confirm which red dot fits. If you have Glock MOS (optics ready) model, you need Glock official provided #01 or #05 plate(you can obtain from Glock for free) to attach the red dot directly, you do not need this optic plate we offer to replace the rear sight for standard Glock models.
The included glock mount fits all generation Glocks below:
Glock 17
Glock 17L
Glock 19
Glock 19x
Glock 20
Glock 21
Glock 22
Glock 23
Glock 24
Glock 26
Glock 27
Glock 29
Glock 30
Glock 30 SF
Glock 31
Glock 32
Glock 33
Glock 34
Glock 35
Glock 36 (Our mount is wider than the slide, but it will still work)
Glock 37
Glock 38
Glock 39
Glock 41
Glock 42 (Our mount is wider than the slide, but it will still work)
Glock 43 (Our mount is wider than the slide, but it will still work)
Glock 43x (Our mount is wider than the slide, but it will still work)
Glock 44
Glock 45
Glock 46
Glock 48 (Our mount is wider than the slide, but it will still work)
Canik TP9SF
Bersa BP9CC
Tactical Solutions .22lr Conversion
Advantage Arms .22lr Conversion
Also fits
Taurus G3C
Taurus G3 with Factory Steel Sight
Taurus TX4
Does not fit Glock MOS models.
Glock 17 Gen 4 MOS
Glock 19 Gen 4 MOS
Glock 34 Gen 4 MOS
Glock 35 Gen 4 MOS
Glock 40 Gen 4 MOS
Glock 41 Gen 4 MOS
Glock 22 Gen 5 MOS
Glock 23 Gen 5 MOS
Glock 34 Gen 5 MOS
Glock 45 MOS
Glock 43x MOS
Glock 48 MOS
Does not fit any Glock pistol with aftermarket slide
(buyer need to verify what kind of optic cut the it has)
Does NOT fit any other Taurus models such as G2, G3, TX22, G2C, PT111
Below is an installation video created by a gunsmith installing the plate on his glock 17. It is the same method for other handguns such as 19, 20, 22, 30, 36, 40, 43 ect.
https://www.youtube.com/watch?v=8QSxdZY723c&t=201s
When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates.
The glock mounting plate basically replaces the rear sight of the handgun. The rear sight dovetail is exactly the same for all glock model, therefore this plate fits all glocks from glock 17 to glock 43 to glock “100”. Link below(please copy the web link to open in new broswer) is an installation video created by a customer installing the plate on his glock 17. It is the same method for other handguns such as 19, 20, 22, 30, 36, 40, 43 ect.
https://www.youtube.com/watch?v=8QSxdZY723c&t=201s
This mount fits all generation Glocks:
Glock 17
Glock 17L
Glock 19
Glock 19x
Glock 20
Glock 21
Glock 22
Glock 23
Glock 24
Glock 26
Glock 27
Glock 29
Glock 30
Glock 30 SF
Glock 31
Glock 32
Glock 33
Glock 34
Glock 35
Glock 36 (Our mount is wider than the slide, but it will still work)
Glock 37
Glock 38
Glock 39
Glock 41
Glock 42 (Our mount is wider than the slide, but it will still work)
Glock 43 (Our mount is wider than the slide, but it will still work)
Glock 43x (Our mount is wider than the slide, but it will still work)
Glock 44
Glock 45
Glock 46
Glock 48 (Our mount is wider than the slide, but it will still work)
Canik TP9SF
Bersa BP9CC
Tactical Solutions .22lr Conversion
Advantage Arms .22lr Conversion
Does not fit Glock MOS models.
Glock 17 Gen 4 MOS
Glock 19 Gen 4 MOS
Glock 34 Gen 4 MOS
Glock 35 Gen 4 MOS
Glock 40 Gen 4 MOS
Glock 41 Gen 4 MOS
Glock 22 Gen 5 MOS
Glock 23 Gen 5 MOS
Glock 34 Gen 5 MOS
Glock 45 MOS
Glock 43x MOS
Glock 48 MOS
Fully shockproof and fogproof.
Waterproof guranteed for 30 minutes under 1.7feet
Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture
Fully windage and elevation adjustable and lockable
5 MOA
5 Illumination Settings.
Powered by a lithium CR2032 battery(Included)
Magnification: 1X
Sight Window: 25mm x 16mm; .98" x .62"
Elevation Adustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)
Windage Adjustment Range: 3° or 190" @ 100 yds (524 cm @ 100 m)
Set Value for One Scale Division: 1 MOA or 1" @ 100 yds with 60 scale divisions per turn
Subtension of the Aiming Dot: 4 MOA (10.5 cm @ 100 m)
Parallax-Free Sighting Distance: approx. 50 yds
Recoil Resistance: At least 1000 Gs
Operating Temperature Range: -10°F to +130°F (-25°C to +55°C)
Storage Temperature Range: -40°F to +160°F (-40°C to +70°C)
Power Supply: 3V with one CR 2032 Lithium battery
Dimensions: L 2.0" x W 1.0" x H 1.1" (52 mm x 26 mm x 28 mm)
Weight (in operating condition without mounting materials): 0.9 oz (25 g).
Included:
Allen wrench to tighten fasteners
Screwdriver
Adjusting disc
Protective cap
3V Lithium battery (CR 2032)
Operating instructions
Weaver/Picatinny-style mount
Mounting plate for Glock
Extra rubber sealing ring for battery compartment
Ade Advanced Optics 1 Year USA warranty
Mounting plate is designed for Glock 17, 19, 23 ect to fit following micro red dots
1.
Ade Advanced Optics rd3-001, rd3-02, rd3-009
2.
Sightmark mini shot reflex sight
3. V
ortex Razor/Viper/Venom micro red dot
4. B
urris Fastfire micro red dot(some burris red dot might require longer screws which is not included)
5. And similar Micro/Compact style mini Red dot sights
ADE RD3-006, alone with RD3-009,RD3-012,RD3-013 do NOT fit Springfield HELLCAT OSP, because springfield Hellcat OSP red dot footprint is based on Shield RMS. ADE sights has the footprint of Doctor/Vortex Venom type footprint. This RD3-006, and RD3-009, RD3-012 and RD3-013 fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot. All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. When you first receive the red dot. It has a picatinny mounting plate pre-assembled. Please use allen wrench provided to take out the 2 hex screws on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates that are sold separately. There are many popular handguns on the market, due to the size difference of the handguns, each mounting plate is slightly different in dimensions. There are also many manufacturers making a variety of handgun plates that replace the rear sight, including ADE, Lakeline LLC, EGW, and Outerimpact. The screw comes with our red dot come with a pair of M3x6mm screws to connect to the pre-assembled picatinny mounting base. Some mounting plates made by other companies for specific handgun might need a longer screw such as M3x8mm or shorter screw such as M3x4mm depends on the thickness of the mounting plate/adapter. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.
Payments are accepted through Paypal.
We ship through USPS First Class Mail from Oregon, west part of the country should receive in 1-3 days,middle part and east part of the country should receive in 3-6 days!
NO INTERNATIONAL SHIPPING!
We promise our best quality and the lowest price for our customers, if the item is not as the description in the listing page, we will issue a exchange or full refund. if the item is the same as the description, we willl charge a 15% restocking fee. We are a new seller on Ebay, all our prices are really low compare to others, because we want to earn feedbacks. Please understand our feedback will be left once after we have received feedback from buyer.
Our goal is to place a profit margin of ~ per item and sell in volume. As such, the more you save the more we make. While the others are selling 1 item, we are selling 10 ~ 20 items due to our price reduction.
Please use the "Ask Seller A Question" button. Please allow up to 24 hours for a response. Usually the buyer will get response in 6 hours.
Customer Satisfaction
• Please contact us right away (via eBay Messages) if you have any concerns, questions or issues about your purchase – and before you leave feedback.
• If you give us the chance, we will make every effort to make it right for you!
• We strive for five stars from you in feedback – and work hard to earn it.
• Customer satisfaction is very important to us and our goal is to have every customer want to be a repeat customer.
Track Page Views With
Auctiva's FREE Counter