10' HTP replacement MIG Welding Gun Torch Stinger for Lincoln Magnum 100L K530-5

Description

A brand new 10 ft, HTP direct plug in replacement welding gun for the small Lincoln Welders. It fits all of the following models:
SP-85, SP-100, SP-100I, SP-100T, SP-125 Plus, SP-130T, SP-135 Plus, SP-140I, SP-155, SP-170, SP-170I, SP-170T, SP-175 Plus, SP-175T, Handy MIG 170I, MIG Pak 10, MIG Pak 15, Pro 100®, Pro 155, Pro-Core 100, Pro-MIG 125, Pro-MIG 175, Weldmark 135 Plus, Weld-Pak 100, Weld-Pak 100HD, Weld-Pak 125, Weld-Pak 155, Weld-Pak 175HD, Weld-Pak 3200HD, Weld-Pak 5000HD, Power MIG 300
This 10 ft long gun will handle .023”, .024”, .025”, .030” and .035” diameter welding wires. It will feed all types of wire, steel wire using gas, flux cored wire requiring no gas, stainless steel wire, and with a
teflon liner, you can feed aluminum wire.   It comes standard with a .035” diameter tip in the welding gun.
This HTP replacement gun is better than the OEM gun,
as it is a heavier duty gun with more copper in the cable than the OEM Gun.  And you can also see the heavy duty spring in both the handle and where the gun plugs into the machine, which offers a much better support system than the OEM gun (picture 3).  You can see from Picture 4, the diameter of the brass plug that goes into the welder is .625", and Picture 5 shows the 2 spade terminal connections for the trigger wires.  Our color coordinated red and black handle, matches the color of your welder, and has a good clean ergonomic design, so it fits in your hand better than the Lincoln gun.  The welding gun is complete - no tricks here - it includes the liner, gas nozzle .035 tip and has the spade terminal trigger connections.  If you are looking for the K530-6 welding gun with the round 4 pin connector for the Power Mig 140 and 180, we have this in our store also - it is e-bay item number
170621018809
.
Picture 6 (photo 1) shows you the high quality of this gun. The crimp is insulated to protect the trigger wires from chafing. Picture 7 (photo 2) shows the actual crimp with the insulation removed. You can see the crimp to retain the rubber outer jacket and the copper crimp which secures the copper wires to the brass fitting to carry the welding current. Picture 8 (photo 3) shows a cutaway of the coaxial cable assembly, where you can see the copper wires that carry the welding current, the trigger wires, the inner tube that the wires are wrapped around, and which also has the liner running up the center of it. Between the liner and the inner tube is where the shield gas runs. We use the same high quality construction on this welding gun we use on all of the welding guns which are OEM on the HTP Mig welders.
Best of all, this heavier duty, better designed gun will keep more of your hard earned dollars in your pocket.  This gun uses the 2 spade connectors to make the trigger connection.  If you need the round connector, that is the K530-6 which is in our store -
it is e-bay item number
170621018809
.
***Save on shipping
by combining purchases of select MIG, TIG, or Plasma parts. However,
you must pay for all items with one combined payment for this shipping discount.
Separate payments for each item are not eligible for a shipping discount
.
Go to our store and see all the items we have for sale:
https://stores.ebay.com/welders4less
If you need any other hard to find welder parts that are not listed, send us an e-mail with a digital photo- we might have just what you need.
Buy in confidence from HTP America, Inc., your total welding specialist since 1981, where for over 35 years all we have sold are quality welding supplies at affordable prices. Please send us a message if you have any questions on our items.
K530-5HTP